Valves

HALVORN BV25 Interactive 3D Model

DN25 (1 in) two-piece full-bore ball valve in cast 316 stainless, G1 female ends, PTFE seats, blow-out-proof stem and a quarter-turn lever.

HALVORN is a fictional brand. This is a Proofscene demo product.

About the HALVORN BV25

BV25 is a two-piece threaded ball valve: a cast stainless body and a threaded end piece clamp a floating ball between two PTFE seats. The 25 mm bore matches the pipe, so an open valve adds almost no restriction and the line can be pigged or cleaned straight through.

The stem goes in from inside the body and bears up against the neck on a thrust washer, so line pressure can never blow it out. A gland nut above the PTFE packing can be re-tightened in service, and a stop washer keyed to the stem meets a cast lug at open and at shut.

HALVORN is a fictional brand made for this Proofscene demonstration. The model is drawn as CAD, part by part; the figures below are illustrative values typical of this valve class, not a datasheet.

Parts in the 3D model

Technical specifications

Nominal size
DN25 (1 in) Full bore, 25 mm
End connections
G1 female ISO 228-1 parallel; NPT on request (illustrative)
Face to face
90 mm
Lever length
about 150 mm From the stem axis
Working pressure
PN63 / 1000 WOG Illustrative, non-shock
Temperature
-20 to 180 °C Limited by the PTFE seats
Flow coefficient
Kv about 100 Illustrative, fully open
Operating torque
about 8 N·m Illustrative, at rated pressure
Body and end piece
CF8M (cast 316) Investment cast, machined
Ball and stem
316 stainless
Seats and packing
PTFE Thrust washer glass-filled PTFE
Lever
304 stainless Orange vinyl grip

Fictional demonstration product. HALVORN is not a real company and BV25 is not a real part: the geometry is drawn by Proofscene from published DN25 two-piece valve proportions, and every figure on this page is illustrative.

Interactive 3D product demos by Proofscene · Build one for your product

HALVORN BV25